Melody - 5kg

An emulsion of acrylic polymers that is very resistant, definitely bright and suitable to withstand the black mark, i. e. the typical stripes generated by the shoe soles of by the rubber wheels of the fork lift trucks. It is suitable for intense traffic, with slide-proof action and easy dewaxing.

Melody withstands very well the high speed for a “wet” effect result. Suitable for PVC, non- polished marble, linoleum and floating floors. Its use is recommended in all those situations of intense passages such as hallways, corridors, ballrooms, offices, banks, etc...

Melody has countless fields of application:

- on all types of water-resistant synthetic floors (linoleum, PVC, rubber, etc.).

- on non-polished marble - on pre-treated wood - on resin floors that have lost their original brightness

- on the sealed batches (previously treated with Stratos) - on floating floors Its special features recommend it use in hospitals, banks, offices, schools, etc.

Furthermore, Melody is different from the usually used waxes because of its trend not to yellow or darken at the edges.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

It is used as pure. Prepare the surface on which you will apply Melody as follows:

-If the floor is waxed, remove any layers of wax by the purposely-allocated de-waxing (Stripsi, Strip HS, Opaline), by single disk machine and black disk for hard floors (marble, granite and the like), brown or blue disk for resilient floors

(linoleum, PVC, rubber, etc.).

- Suck with a wet vacuum cleaner - Flush the surface and suck -Make sure there are no wax residues. Otherwise, repeat the aforementioned operations Application of the Melody wax:

- Spread a first thin even layer with a wax spreader or a mop, taking care to proceed with parallel stripes

- Wait for it do fully dry (30 to 35 minutes) - Proceed with a second layer, crossing in the opposite direction.

- Wait again until it dries completely (for the aforementioned time) Further layers can be applied if you want to obtain a thicker film. This operation will allow obtaining the wet effect, allowing to act on the film by passing the high speed machine (equipped with a disk in natural fiber). For maintenance, we recommend a weekly washing of the treated floor by a neutral detergent without residue (Tergilux). For daily sweeping, we recommend the use of impregnated gauzes. To restore the brightness (spray-buffing), spray M 2000 HS and use the high-speed machine (1600 to 2000 rpm) with natural fiber disk, until the wished brightness is obtained. For dry maintenance (spray-cleaning), spray Wet

Look and then intervene with a low-speed machine (400 rpm max.) with red disk. The product is frost sensitive, therefore, do not apply at temperatures below 5°C, do not generate air currents to accelerate drying; do not apply the second layer if the first one has not fully dried.

WARNINGSTECHNICAL DATAPACKAGING

• PHYSICAL STATUS: liquid
• COLOR: white
• ODOR: slightly ammoniacal
• ACTIVE SUBSTANCE: 40% approx
• pH: 9
• SPECIFIC WEIGHT: 1.03
• FLAMMABILITY: >60°C

CODE	PACK
ALC 488	2 x 5 kg