Neutro Strip - 5L

A product based on builders, surfactants and waterborne synergistic agents, which was specially developed to remove the waxy layers from floors in linoleum, marble, stoneware, etc.

An optimum detergent and solvent for all those cases where the typical smell of the usual dewaxing agents would create issues. It avoids decolorization and is easily used.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

Procedure for manual use: Prepare the solution in a bucket diluting the product at 10 to 15% (1 to 1.5 liters for 10 liters of water) for a dewaxing operation. Increase or diminish the concentration depending upon the thickness of the waxy film to be removed. Apply onto the surface; let it act for

5 to 10 minutes before rinsing. In situations of surfaces with old layers of wax that were never removed in time, increase the concentration until you achieve the set objective. If viable, prepare the solution in hot water to increase its effectiveness.

The rinsing stage must never be overlooked to have a good result in the subsequent stage of wax application. Any residues of Neutro Strip, which are not visible to the naked eye, may affect the wax film.

Procedure for use with equipment: Prepare the solution directly in the tank of the single-disk machine (brown disk for rubber; black disk for hard surfaces) or in a separated bucket, with a 10% dilution of product. Apply Neutro Strip onto the surface with the machine without overlooking any areas to be dewaxed, flush and then wet vacuum or aerate the place. Avoid using the product at the presence of aluminum or light alloy dust.

PROTECTION AND CARE OF FLOORS PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• PHYSICAL STATUS: liquid
• COLOR: colorless
• ODOR: mint
• ACTIVE SUBSTANCE: 15%
• pH: 11.4
• SPECIFIC WEIGHT: 1.00
• FLAMMABILITY: >60°C

CODE	PACK
ALC 754	2 x 5 L