Primacera - 5kg

An emulsion of acrylic polymers, synthetic waxes, coalescent agents and synergistic substances, suitable for the smooth or “bolted” rubber floors.

The specificity lies in the elastic structure of the film, which bends and returns together with the coating, without crumbling in micro-fractures that are invisible to a naked eye.

Thanks to its elasticity, Primacera ensures greater duration.

It can also be applied to the PVC which is usually used in offices or institutions.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

It is used as pure. The rubber floors are originally treated with a silicone emulsion, which needs to be previously removed with product Accadi. With the help of a dingle-disk machine, dilute Accadi at 5 to 10% (increase the metering if required) and wash; then, flush and make sure there are no longer traces of silicone. Application of the

Primacera wax:

- Spread a first thin even layer with a wax spreader or a mop, taking care to proceed with parallel stripes

- Wait for it do fully dry (30 to 35 minutes) - Proceed with a second layer, crossing in the opposite direction.

- Wait again until it dries completely (for the aforementioned time) Further layers can be applied if you want to obtain a thicker film.

This operation will allow obtaining the wet effect, allowing to act on the film by passing the high speed machine

(equipped with a disk in natural fiber).

For maintenance, we recommend a weekly washing of the treated floor by a neutral detergent without residue

(Tergilux). For daily sweeping, we recommend the use of impregnated gauzes. To restore the brightness (spray- buffing), spray M 2000 and use the high-speed machine (1600 to 2000 rpm) with natural fiber disk, until the wished brightness is obtained. For dry maintenance (spray-cleaning), spray Wet Look and then intervene with a low-speed machine (400 rpm max.) with red disk. The product is frost sensitive, therefore, do not apply at temperatures below 5°C, do not generate air currents to accelerate drying; do not apply the second layer if the first one has not fully dried.

PROTECTION AND CARE OF FLOORS PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• PHYSICAL STATUS: liquid
• COLOR: white
• ODOR: slightly aminic
• ACTIVE SUBSTANCE: 32%
• pH: 9
• SPECIFIC WEIGHT: 1.03
• FLAMMABILITY: >61°C

CODE	PACK
ALC 735	2 x 5 kg