Stripsi - 1L

An alkaline-based compound active on the removable wax films (including the acrylic ones). Its particular formula makes it a super-active de-waxing agent that acts thoroughly on all the unpainted surfaces (including the vertical ones). A verygood reagent for the removal of excessive accumulations of metalized or glossy acrylic wax.

Not recommended for linoleum. Recommended on marble, PVC, stoneware, stone and all the hard surfaces. Pleasantly scented, with controlled foam, so it reduces the slipperiness and the time during the washing operation. It does not release harmful vapors, ideal for the greasy dirt in the corners, in the skirting boards and on the stairways, where you cannot use the single disk machine and need to clean manually.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

Procedure for manual use: For ordinary de-waxing, dilute the product at 10%to 15%(1 to 15 l for 10 liters of water, preferably hot). Increase or diminish the concentration depending upon the thickness of the waxy film to be removed.

Spread onto the floor by a mop, let it act 10 to 15 minutes and flush.

In situations of surfaces with old layers of wax that were never removed in time, increase the concentration until you achieve the set objective. If viable, prepare the solution in hot water to increase its effectiveness. The rinsing stage must never be overlooked to have a good result in the subsequent stage of wax application. Any residues of Stripsi, which are not visible to the naked eye, may affect the wax film.

Dewaxing by single-disk machine: Prepare the solution directly in the tank of the single-disk machine or in a separated bucket, with a 10%dilution of product. Apply Stripsi onto the surface with the machine without overlooking any areas to be dewaxed, flush and then wet vacuum or aerate the place.

Avoid using the product at the presence of aluminum or light alloy dust.

PROTECTION AND CARE OF FLOORS PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• H 314 Causes severe skin burns and eye damage H 290 may be corrosive to metals

• PHYSICAL STATUS: liquid
• COLOR: colorless
• ODOR: soft glycolic
• ACTIVE SUBSTANCE:19%
• pH:14
• SPECIFIC WEIGHT:1.07
• FLAMMABILITY:>60°C

CODE	PACK
ALC 501	12 x 1 L
ALC 682	6 x 5 kg
ALC 682	2 x 5 kg