Lavamotor - 20kg

High-concentration mixture.

It does not contain petroleum solvents; recommended for the external washing car, truck, bus, motorbike engines and compressors.

Specific for the removal of oil, grease and mold of either the motor installed or of the individual parts. If the engine grease soils the stoneware or concrete floor of the workshop, the product can be used to clean the surface involved, which then needs to be rinsed.

The product does not affect the plastic, rubber or aluminum parts.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

The product can be used as it is, or diluted in water at 50%.

For the washing of the engine installed, which must absolutely be cols, we recommend protecting the ECU’s and the bodyshell parts in proximity of the engine itself.

After protecting the aforementioned parts, prepare the solution in compliance with the quantity of grease to be removed, spray it at low pressure or with a rag. Spray on all the parts to be degreased, let the solution act for 5 minutes, rinse thoroughly with a low pressure jet of water or with a wet cloth. Brush the areas where the dirt is more persistent.

We recommend drying the engine installed by an air blow, in order to prevent the risk of oxidizing. Follow the same procedures to degrease the individual parts of the engine.

CAR - TRUCK - CAMPER PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• H 319 Causes serious eye irritation

• PHYSICAL STATUS: liquid
• COLOR: orange
• ODOR: glycol
• ACTIVE SUBSTANCE: 26%
• pH: 11
• SPECIFIC WEIGHT: 1.05
• FLAMMABILITY: >60°C

CODE	PACK
ALC 755	2 x 5 kg
ALC 467	1 x 20 kg