Accadi - 25kg

It is a concentrated compound of detergents, alkaline substances and waterborne synergistic agents, which acts thoroughly and quickly. This foam-controlled product provides a thorough degreasing to clean all types of industrial floors, workshops, garages and warehouses. Its special formula allows its application of fat dirt, both of vegetable and animal origin.

Therefore, it can be used in the food processing industry, charcuteries and slaughterhouses. It is appropriate for those surfaces that resist to alkaline detergents, dirty with grease stains, including the dried ones. Furthermore, it has a dewaxing action: it manages to fully remove all the layers of metalized wax. It is also recommended for the removal of paraffin and silicone on new rubber and PVC floors.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

The particular formula of the product allows for the most diversified modes of use, both manual and by equipment, ensuring a high level of cleanness and hygiene in every environment.

Procedure for manual use: Dilute 5% to 10% in a bucket with 10 of water (preferably warm); increase depending on the level of dirt to be removed. Lay a solution of ACCADI onto the surface to be treated and let it act for some minutes. Remove with a dry cloth or a wet vacuum cleaner. If needed, rinse the surface with clean water.

Procedure for use with equipment: Dilute 3 to 5% of the product in a bucket of water. Poor the solution into the tank of the equipment used (washer-drier or single-disc machine). Apply the solution onto the surface to be treated (if required, do the soaking and let it act for some minutes). Move back with the equipment onto the treated surface and suck. Flush if required.

Since Accadì shows high alkalinity, it can also be used as dewaxing or as a first action on new floors in rubber or PVC, to remove paraffin or silicone. On these types of floors, it is important to ascertain their resistance to alkali (make a small buffer test in a corner). Do not use on aluminum or light alloys. In any case, do not let the product act for more than 3 or 4 minutes and then flush.

DEGREASER PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• H 290 Can be corrosive on metals H 314 Causes severe skin burns and eye damage

• PHYSICAL STATUS: liquid
• COLOR: pale yellow
• ODOR: soft
• ACTIVE SUBSTANCE: 32%
• pH: 14
• SPECIFIC WEIGHT: 1.18
• FLAMMABILITY: no

CODE	PACK
ALC 857	4 x 3 kg
ALC 634	1 x 25 kg