Opaline - 5L

A product developed to delustre the waxy film, where complete thorough dewaxing is not required, and only a partial one is sufficient. This method is particularly suitable if you need to speed up the waxing procedure on the treated surfaces. Its fast volatility allows it being used on the floating floors of the offices and in the heavy traffic areas, where the waxing and dewaxing operations are a race against time. The low residue allows avoiding the rinsing stage, which is another advantageous aspect in speeding up the procedure.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

Manual dewaxing: We recommend evenly distributing the product onto the surface with a clean or new mop; in any case, keep at hand a bucket filled with clean water to prevent the particles removed by Opaline from grabbing to the mop fabric and depositing again onto the surface. If this procedure is followed as appropriate, the rinsing stage can be avoided.

Dewaxing by single-disk machine: Fill the single disk machine tank with the product as it is. The machine must be equipped with a green disk. Proceed progressively, taking care to dispense sufficient

Opaline and depending on the intensity of delustering you intend to obtain by partial dewaxing. If the disk gives signals of friction with the surface, we recommend turning it on the other side; in any case, it can be recovered by washing it at the end of the operation with a 10% solution of Stripsi dewaxing agent and - once dry - it can be used again.

PROTECTION AND CARE OF FLOORS PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• H 319 Causes serious eye irritation. Flammable liquid and vapors

• PHYSICAL STATUS: liquid
• COLOR: colorless
• ODOR: glycolic
• ACTIVE SUBSTANCE: 12%
• pH: 7
• SPECIFIC WEIGHT: 0.97
• FLAMMABILITY: 40°C

CODE	PACK
ALC 703	6 x 750 mL
ALC 806	2 x 5 L