Calcis - 5kg

A compound base on phosphoric acid, a specific reagent for limestone Formulated for the building industry on concrete floors stained by limestone, lime residues and all the dry dirt created by the masons.

It descaling power removes the ferruginous encrustations, including the white efflorescences that are typical of stoneware and terracotta.

Suitable also for walls and facades that are dirty with smog and rain, be they tiled, in stoneware or in terracotta.

Calcis is an inhibited product, it can be used both indoor and outdoor since it does not generate any kind of fumes or smells; in any case, avoid its contact with metals and flush.

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

Procedure for manual use: For manual use, start - depending on the type and quantity of limestone to be removed - with a metering of 10 to 15% diluted in a bucket of water. Diminish or increase as required until the wished result is achieved. Preferably use honeycomb cloths and floor scrubbers, which can act as help, so that the product penetrates all the pores of the surface through the rubbing action. Wear gloves and always let the product react before rinsing.

Procedure for use with equipment: Prepare the solution in a bucket of water with a dilution between 5 and 10% depending on the detected conditions and pour it into the tank of the machine

(scrubber- drier or single-disk machine). Wash the surface, insisting on those areas that are most loaded with limestone or efflorescences, then rinse.

ACID PRODUCT FOR PROFESSIONAL USE

WARNINGSTECHNICAL DATAPACKAGING

• H 314 Causes severe skin burns and eye damage

• PHYSICAL STATUS: liquid
• COLOR: green
• ODOR: fresh
• ACTIVE SUBSTANCE: 27%
• pH: 1
• SPECIFIC WEIGHT: 1.12
• FLAMMABILITY: >61°C

CODE	PACK
ALC 849	2 x 5 kg