Sanagel - 3kg

A waterborne formula of alkaline substances, supported by active chlorine, which becomes determining for the sanitizing action and contributes to the dampening of the bacterial load. By the combined action of its components,

Sanagel ensures an immediate result on a wide range of types of dirt, including the molds and the grease of organic origin. Specifically indicated for floors, horizontal surfaces and equipment located where food products exist and are processed. Sanagel is specifically used for cleaning in compliance with the

HACCP system in the Catering and Food Processing Industry for the process cycle of exhibition windows, kitchen appliances, work surfaces, tools, cutlery, slicers, refrigerators, food stores, etc...

Recommended for the soaking of cutlery and kitchenware before washing in dishwasher. Product included in the registration folder as biocidal pursuant to

Regulations UE 548/12 (BPR).

ATTENTION: do not use it in contact with aluminum and light alloys in general.

Product appropriate for the cleaning of surfaces in contact with food products.

PRODUCT FOR PROFESSIONAL USE

PRODUCT FOR PROFESSIONAL USE

DILUTION AND USE

The product can be used both manually and by machine.

For manual use: Prepare the solution in s purposely-allocated bucket, considering that - for daily cleaning - a dose of 3 to 5% (0.3 to 0.5 liters for 10 liers of water) is sufficient. Increase to 20% if a thorough cleaning is required or in overlooked situations, where the organic fat exceeds a given limit.

For the soaking of cutlery: Prepare the solution in a purposely-allocated bucket or in the either stainless steel or ceramic sink. Dilute Sanagel at 5% and immerse the cutlery for at least 10 minutes, then put the cutlery - without rinsing it - into the dishwasher canister and perform the usual washing cycle. In case soaking is just used to give brightness to old worn cutlery that has already been washed, soak them for at least 20 minutes and then flush.

Before use: Make sure that the surfaces are resistant to high alkalinity. Do not mix Sanagel with other products. Follow the indications of the label or the HACCP plan. Do not use on aluminum, iron or light alloys.

For machine use: Prepare the solution in a bucket or directly in the machine tank, mixing a percentage of 2% of Sanagel with water. Increase the concentration until you achieved the wished result and depending on the type of dirt.

WARNINGSTECHNICAL DATAPACKAGING

• H 314 Causes severe skin burns and eye damage H 412 Harmful to aquatic life with long lasting effects

• PHYSICAL STATUS: liquid
• COLOR: colorless
• ODOR: hypochlorite
• ACTIVE SUBSTANCE: 16% (active
• chlorine: 2%)
• pH: 14
• SPECIFIC WEIGHT: 1.15
• FLAMMABILITY: >60°C

CODE	PACK
ALC 863	4 x 3 kg